R/C Helicopter Hobby in Singapore
|
Home | Why R/C Helicopter? | How to start? | Setting up | Articles | Flying Lessons | Links | Message Board | For Sale |
contributed by Clarence Boudville
Rigging Your WES Lipo Charger for Field Use
Items required:-
2 nos of 12VDC, 7AH batteries
Cable and Crocodile Clips
Just see the picture.
For field use, connect the 12V battery in series. The WES Charger can take
up to 26VDC so 24VDC is OK. In fact this can also be used at home without the
need for the 110VAC adapter.
Tool needed for inserting tail rotor shaft (You can get this at ACE Hardware
Mega Mall).
Do not try to push in by hand because the carbon shaft might break. This gives
better control.
Secured Tail Servo Mount.
EPOXY the tail servo mount to the tail boom. DO NOT CA! Then install the servo
and then use a cable tie.